RAIDEN 7.4v 2200mAh 2S1P 25C Li-Polymer Battery for Futaba 8FG
New Upgraded to CF-pattern wrapping with Real 25C Output!
Design to fit and replace the NiCD battery for Futaba 8FG or 8FG Super.
** DO NOT USE THE ORIGINAL WALL CHARGER TO CHARGE THIS LI-PO BATTERY INSIDE THE TRANSMITTER !!
This Li-Po battery MUST BE REMOVED OUT from the transmitter and be charged with Li-Po balance charger.
Features:
-
Very good finishing, the cells are well-protected inside the CF-pattern packaging
-
All wires and cables in the Li-Po are made with high quality silicon
-
Discharge in high magnification, low internal resistance
-
High quality cells with long life-cycle
-
High volume and very stable
|
RAIDEN Battery Speficifations
|
|
Model No. |
RD7-22A25 |
|
Capacity |
2200mAh |
|
Connection |
2S1P |
|
Dimensions LxWxH |
103 x 33.8 x 16 (± 2mm) |
|
Weight |
~119g |
|
Discharge Rate (Constant) |
25C |
|
Discharge Rate (Brust) |
30C |
|
Charging Connector |
JST-XH (balance charge) |
|
Discharge Connector |
Servo Plug |
|
Charge Rates |
3C (suggested) / 4C (max) |
|
Application |
Transmitter battery for Futaba 8FG.
or connect to 7.4V high-voltage receiver directly.
Or connect to normal receiver via BEC.
|
Tips to use Li-Po Battery:
1. DO NOT CHARGE the battery when it is hot / warm.
2. DO NOT OVERUSE the battery, always leave 15% of capacity in the cells.
3. DO NOT USE the battery if it is swelled.
4. DO NOT CHARGE the battery with high current (under the maximum charge rate in the above table).
5. Always charge the battery with balance charger.
|
Special Offer! 
