Futaba 8FG Super 2.4Ghz 12+2ch Transmitter & R6208SB HV Receiver S.Bus Combo w/ 1700mAh Battery
[F-8FGS/R6208SB]

Futaba 8FG Super 2.4Ghz 12+2ch Transmitter & R6208SB High-Voltage Receiver S.Bus Combo with Rechargable 1700mAh Battery

NEW Come with lastest firmware with multirotor model. CE marked!
 

You may control your airplanes, helis, multirotors and gliders all with this single 2.4Ghz T8FG Super transmitter! The software is upgradeable via SD Card with the flash switch. The software menu is available in 9 languages: English, Japanses, Deutsch, French, Italiano, Espanol, Dutch, Russian  and čeština.

The original 8FG was already the best 2.4GHz radio value available. Now, for the same cost, the 8FG Super offers six additional channels — plus new software with menus tailored to Futaba's super-fast CGY750 gyro. Recommended by Bobby Watts, Matt Botos and Kyle Stacy, it's the first radio that really supports flybarless helicopters. And it's perfect for all other applications, too...a smart choice for ANY forward-looking flier.

T8FG Features:

• Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies
• Eight proportional channels and two switched channels
• "Real-time" response with 2048 resolution and extremely low latency
• Perfectly balanced right out of the box for neckstrap users
• SensorTouch pad enables quick and easy menu navigation with only a light touch
• Pre-defined mixes for easy programming
• Accepts a 32MB - 2GB SD memory card (not included) for software updates and almost unlimited aircraft memories
• 128x64 backlit LCD screen offers adjustable contrast for easy viewing in any light condition
• 2048 resolution enables servos to pick up even the slightest stick movements with extremely low latency
• New slim shape that is more comfortable to hold

New Features in 8FG Super:

• Expanded with 14 total transmitter channels — 12 proportional and two switched.
• Included R6208SB receiver's PWM (Pulse Width Modulation) channels support up to 8 standard analog or digital servos — and it handles up to 18 channels when used with an S.Bus system.
• Gyro menu supports 3-axis gyros and is perfectly tailored to the CGY750.
• User menu allows pilots to customize and display frequently used functions.
• VPP (Variable Pitch Propeller) compatibility can be set to three conditions for throttle and pitch curve.
• Swash trim can be adjusted from the swash screen.
   

R6208SB S.Bus Receiver:
R6208SB is a new version 2.4Ghz S.Bus 8-channel Receiver from Futaba.

• S. BUS / High Voltage / 2.4GHz FASST / DIVERSITY
• Utilizes digital serial data communication technology to transmit control signals between the receiver and servos using S.Bus hubs    and cables (available separately)
• Easy programming with the SBC-1 Channel Setting Tool (FUTM4190), S-Bus receivers or PCLink software
• SBD-1 decoder cables (not included) allow the use of existing analog and digital servos
• Limited only by the available number of channels on transmitter
• Prevents mismatched servo/channel connections
   

This's everything modelers want in a full-range 2.4GHz system! Futaba has been using Spread Spectrum technology for nearly 15 years in industrial R/C applications, so they have the dedicated engineering staff with 2.4GHz expertise. Unlike other manufacturers who started offering 2.4GHz for hobby R/C models using off-the-shelf IC chips, Futaba invested in extra research and development - resulting in a system that uses a custom IC chip that's ideally suited for the unique demands of R/C modeling. When you discover all the advantages of Futaba's 2.4GHz FASST system, you'll see that it was worth the wait!

The 2.4GHz FASST system: offering the highest levels of performance, convenience and "peace of mind" for airplane AND heli flyers!

What makes Futaba's 2.4GHz system different?

• Channel Shifting - Means that interference is virtually impossible. Futaba's system only occupies an individual frequency for 2 milliseconds!
• Stronger, More Robust Link - Futaba's system doesn't need redundant receivers. Instead, it uses a combination of Channel Shifting and Dual Antenna Diversity (DAD) to provide a robust, highly dependable link between transmitter and receiver.
• Pre-Vision^TM - Looks ahead for potential problems when scanning incoming data and applies sophisticated error correction techniques - resulting in a system that gives the user a solid, impenetrable connection with his model.
• Custom-Developed Technology - Futaba uses custom IC chips that have been designed specifically for radio control. With over 30 years of R/C system experience, Futaba knows it's important to make the investment in research and development to assure quality, reliability and safety. The FASST system is a result of extensive development and testing and it's the only system good enough to carry the Futaba name.

Convenient, Worry-Free Operation
Now you can enjoy the convenience of 2.4GHz operation with the quality and reliability of Futaba! No more worry about someone accidentally turning on another system on your frequency. You can fly anywhere - flying field, neighborhood park, schoolyard - without concern for conflict with another nearby radio system. And at the flying field there's no more waiting for your frequency clip to become available... just turn it on and fly!

Continuous Channel Shifting
Unlike other 2.4GHz systems that stay on one or two frequencies (leaving the potential for interference), the 2.4GHz FASST shifts every two milliseconds, so signal conflicts and interruptions are virtually impossible.

Pre-Vision^TM Packet Screening Technology
Scans the incoming data to look ahead for potential problems and apply sophisticated error correction techniques. The result is a system that gives the user a solid, impenetrable link with his model.

Dual Antenna Diversity (DAD)
Which means the system seamlessly selects the best reception between two receiver antennas, so there's no loss of signal, regardless of the plane's attitude.

The Easy Link^TM system
The 8FG transmitter has a unique ID code that, after linking with the R6208SB receiver, assures this receiver will only follow commands from this transmitter. Set it and forget it! Just push the recessed button on the receiver and it will never forget the unique transmitter ID code, which locks this receiver to the transmitter. And with over 134 million possible codes, there's no chance for a conflict.

Higher sensitivity
Which enables you to stay in complete control of your model, even at greater distances. It also offers greater signal selectivity, which prevents unwanted interference.

A "no-hassle" Fail Safe system
The 2.4GHz's Fail Safe is programmed right through the transmitter, just like on conventional systems. Other radios require a complicated six-step process to set up their Fail Safe, along with a separate binding plug that can easily be misplaced.

Custom 2.4GHz IC chips
Futaba's own custom IC chips are backed by 15 years of 2.4GHz experience in industrial R/C uses, and are "purpose built" for R/C systems. Some manufacturers rely on off-the-shelf IC chips, without the custom application development that only Futaba's vast experience can provide.


Package Content:
1 x Futaba T8FG 8ch 2.4GHz Transmitter
1 x Futaba R6208SB 8ch 2.4GHz High Speed and High Voltage S.Bus Receiver
1 x HT6F1700B 7.2V 1700mAh NiMH Transmitter Battery
1 x HBC-2C (4) Battery Charger, 230V EU plug  (TX: 7.2V 170mAh & RX: 4.8V 150mAh) (Sorry, we DO NOT have the 110V US/JP charger for this model)
1 x Neck Strap
1 x On/Off Switch Harness, FUTM4385
1 x English Manual


Stock #
 

Note:
This product is CE0682 certified.  NO SERVO is bundled with this combo.
This product must be shipped with INSURED AirParcel or EMS (Free upgrade to DHL for most EU regions), please select EMS when you checkout if you are not sure whether your region supports insured airparcel or not. You may also contact us to confirm before you place the order. Safe packing weight: 2.5KG, you may ship it together with other products.
8FGA and 8FGH are interchangeable, please write in the comment during checkout if you want to specify the model.
Our 2.4Ghz Futaba transmitters & receivers are globally compatible. That means they can be linked with any 2.4Ghz Futaba transmitter or receiver sold in other regions. (e.g. our transmitter with US receiver)
Our Futaba products are directly manufactured by Futaba Corporation (双葉電子工業株式会社). RC711 is not the affiliate of Hobbico, Inc in the United States.
Subject to availability, we will refund you the total amount if we cannot ship out this product to you in 7 days.
Our Futaba T8FG transmitter contains the software option to switch to the "France" mode which compliance with the French radio regulations: